It is one of the best and most time consuming decisions I ever made for my modding – buy a 3D printer. After brutal failures and fun learnings I could start to design and put out prototypes. I knew from start of this mod I wanted to do something special with the GPU. After all,
Custom PC top case part 4 Angl3d Ti casemod be quiet! Dark Base Pro 900
Final stretch of the top exterior acrylic case part. Wanted to bring back more angles and tigh the entire design together with the previously created PSU Shroud. First task was to file down the front edge to make sure it was a perfect fit against the front. I made the front and top 3mm
Custom PC top case part 3 be quiet! Dark Base Pro 900 Angl3d Ti
Work progressing with building the main structure and most part of the top case part. This is an important part of the mod as it will either make it or brake it. I need to tie it together with the front and base part. I hope I will end up with a feeling of one cohesive
Top case part Custom PC be quiet! Dark Base Pro 900 Angl3d Ti
It was time to start working on the 3rd and final external case part, the top. With the front IO panel as the major component to work around and into this case part as the biggest challenge. I also need to figure out a good way to bridge the top part with the front part
Front case part 2 – custom pc acrylic Angl3d Ti pcmod
With the base structure done from the previous part it was not much to wait for. The hard part about this part of the mod of creating an angled front structure is that each piece will influence all the others. The size, the angle, the shape all influence eachother. Almost like laying a puzzle without
Front case – custom pc acrylic Angl3d Ti pcmod
Was with extra excitment that I was ready to start working with the front case part of this mod. I have had an idea about the front since I started this project. In fact, it was the idea of the front that even started this whole project. First I need to ensure it’s located
Custom PC casemod exterior acrylic for Dark Base Pro 900
Big progress on the base structure and bottom part of the custom pc casemod. With the last part of this mod finished with a fairly solid structure, this part will be all about filling the gaps in the exterior acrylic and make one solid structure. With the front part of the bottom almost done, I
Custom PC exterior base plate part 1 – project Angl3d Ti
After creating the base plate bracket it was time to move on with creating the base structure of the base exterior. I got inspired by the original stands of the be quiet! Dark Base Pro 900 as they are angled, so decided to try to incorporate them. What’s not to like with feet like