After over 100 hours of hand filing and acrylic focus the base shape of the PSU Shroud for project Angl3d Ti is finished. Managed to create it divided into two pieces without a visible edge. One of the last pieces of the PSU Shroud mod. All 3 sides angled in opposite directions and created with
The main part of project Redrock is the custom PSU Shroud with an integrated L shaped beam in red color. Same red color as the exterior. It will be challenging to create a perfect fit of the 3 individual pieces as they are hand crafted. I had to redo the entire floor of the
Project Angl3d Ti – Custom PC with dual water cooling loop, vertical GTX 1080Ti sponsored by ASUS ROG, EK Water Blocks, be quiet!, Teamgroup and Enermax. A huge thank you to all of them, making this extraordinary build possible. The inspiration started when I created custom gaming PC Zeuligan and instantly fell in love with
Nothing as scary as tearing a 800$ ASUS GTX1080Ti GPU apart and voiding warranty, but that is also part of the thrill. I love the look of EKWBs Acrylic and Acetal water block. With the GPU mounted vertically there is no need to spend time on a custom backplate, so went with the black backplate
It is an amazing feeling when you start to assembly items planned months ago. My EKWB D5 PWM pump and Aqualis XT 880ml reservoir custom bracket created so long ago is no execption. Will it work together with my custom carbon fiber floor and PSU shroud? Only one way to find out. One major concern
When you think if a custom hard tube water loop and a gaming PC you think if clean lines, order and well planned loop. I had a dilemma as this was my first loop. My main thoughts was to stay 100% true to my Alphacool fittings plan and add some Alphacool pass through fittings. Alphacool
The whole concept when I started thinking about my custom PSU cover or secondary floor, were to mount the top of the pump above the floor and hide the pump under. Adding to that effect I wanted the reservoir next to it. When I did my initial drawing I didn’t have the pump measurements, but
To ensure that I can mount my EKWB D5 PWM pump together with the Aqualis XT 880 ml mounted inside the custom PSU cover / secondary floor of my case I decided to create a combined mounting bracket. Feels like modding started for real. I started with a standard vertical mounting EKWB pump bracket and