It was finally time to finish my first real piece. Last step of first piece in the rest of my life… I’m talking about the custom PSU cover that transformed into a secondary floor including an EKWB D5 PWM Plexi pump, Aqualis XT 880 ml reservoir covering the amazing Corsair RM1000i PSU. The last step
Custom be quiet! Dark Power Pro 11 PSU cover / secondary floor part 2
The whole concept when I started thinking about my custom PSU cover or secondary floor, were to mount the top of the pump above the floor and hide the pump under. Adding to that effect I wanted the reservoir next to it. When I did my initial drawing I didn’t have the pump measurements, but
Custom PSU cover for be quiet! Dark Base Pro 900
Nervous, first time modding and working in acrylic, worried it will not bend as sharp as I need or cracking when bending. After a quick experiment on how much I could bend and how much I should heat my 5mm acrylic sheet I got to work on creating my custom PSU cover / secondary floor
Planning a custom PSU cover / floor for Zeuligan build
The first step was to try to put my thoughts into actionable design and break that into needed parts. The be quiet! Dark Base Pro 900 is an amazing case to build and do modding on due to its very high modularity. Except for the base frame and some brackets, most of it is fastened by